The Insert is an essential component in the injection molding of the Panel Rear plastic part, designed for applications where flexibility and efficiency are key. Made from P20 steel, this insert is used in a single-cavity mold but offers the unique capability to produce two different types of plastic parts. This is achieved through the use of interchangeable inserts, which allow for quick adaptation of the mold to produce different parts as needed.

When a specific part is required, the corresponding interchangeable insert can be assembled, enabling the mold to inject the desired part. This design is especially useful for parts that are similar in structure but differ only in small details, such as variations in shape or size. By utilizing interchangeable inserts, manufacturers can save time, reduce tooling costs, and maintain high flexibility in production, making it an ideal solution for molding Panel Rear parts and similar components.

The venting pin is composed of two parts: the insert and the inside pin. The inside pin is installed within the insert, forming the assembly.
Features and Functionality:
The venting pin is designed to improve the venting condition by allowing gas to exhaust efficiently. Additionally, the rear of the pin is designed with a clearance relative to the insert, ensuring that the assembly is not overly tight and operates smoothly.

Our high-precision small insert pin is made with premium materials and precise machining, ensuring accurate dimensions and durability. Ideal for medical and aerospace fields, it’s easy to install, low-maintenance, and highly reliable.

The insert is a critical component within the mold, used to produce parts such as the bracket, housing, and holder. Due to the high injection pressures and friction from the plastic material during long-term production, the insert is designed to be replaceable. This allows for easy swapping of the worn insert without the need to replace the entire mold, reducing maintenance costs and ensuring the continued efficiency of the production process.

Once assembled, the bracket, housing, and holder form part of a device used for oil level detection and temperature monitoring during cold chain transportation. These devices are designed to maintain precise measurements and ensure the safe transportation of goods under strict environmental conditions.

The gate insert, made from GS344ESR material, is a smart and practical design solution for production molds, particularly in high-volume manufacturing. Over time, the gate area of a mold is subject to wear due to the high injection pressures and friction caused by the flow of plastic. By incorporating a gate insert, manufacturers can address this issue effectively. The gate insert acts as a replaceable component, allowing the worn insert to be swapped out with a new one when necessary, without the need to replace the entire mold. This design not only extends the life of the mold but also reduces maintenance costs and downtime, making it an ideal solution for long-term production runs.

Medical-grade connector used in surgical procedures. It is a 7-pin connector with a bayonet locking mechanism. The connector is made of durable plastic material and is designed to be easily cleaned and sterilized. The pins are made of a conductive metal alloy and are designed to provide a secure connection between the connector and the medical device.
Material : PC/ABS,
Size : Ø25x20mm,
Injection molding, 4CAV.. OEM

Utilizing thermoset injection molding, this cam drive delivers remarkable strength and durability, perfect for demanding environments.

During the injection cycle, the lifter is retracted into the mold cavity when the mold is closed and injected with plastic.
After the plastic part solidifies, the mold starts to open. The lifter then moves in the necessary direction (e.g., up or sideways), which helps to push the part out of any undercut areas or ensures the part is released without distortion